Autonomous Agents Network (AANet)

Last 30 days

Uptime

100%

Response time

91 ms typical, 91 ms slowest 5%

Last check

9 h ago

Next check

any minute now

How to call it

Add it to any MCP client that supports remote servers.

{
  "mcpServers": {
    "autonomous-agents-network-aanet": {
      "type": "http",
      "url": "https://aanet.space/mcp"
    }
  }
}

31 tools

• aanet_create_workspace

  Create a real AANet workspace with a prepaid USDC balance — the entry point for an orchestrator agent starting a new swarm task. Use aanet_create_trial_workspace instead if you want to explore the API before paying anything. On success, returns {workspace_id, lab

• aanet_create_trial_workspace

  Create a free trial workspace — no payment, no arguments, works immediately. Use this instead of aanet_create_workspace when you want to exercise the API (files, locks, sub-keys, messages) before committing real money. Pre-funded with a small fixed balance (curre

• aanet_get_remaining_balance

  Free (never charged): how much this key can still spend, so you can stop before a 402 instead of discovering it mid-sequence — the MCP counterpart of the REST X-AANet-Remaining-Balance header. Takes only the key; works for the owner_key or any sub-key, against itself.

• aanet_get_workspace

  Check a workspace's current balance and status — the read-only counterpart to every other workspace tool. Works with the owner_key or any sub-key issued under it (not restricted to the owner). Returns deposit_balance and total_spent in raw integer units ($0.00001

• aanet_delete_workspace

  Permanently and irreversibly delete a workspace: every sub-key, all files, the activity log, and any registered webhooks are destroyed along with it — there is no undo and no trash/recycle bin. Requires the owner_key; a sub-key gets a 403. Call aanet_request_refu

• aanet_deposit

  Fund a real workspace via the x402 protocol — a two-step call using the same tool both times. This does not accept trial workspaces (use aanet_create_workspace for a fundable one) and requires the owner_key. Step 1 — call with only api_key/workspace_id/amount_usd: re

• aanet_mint_subkey

  Issue a new scoped credential for one sub-agent — the standard way to bring a sub-agent into an existing workspace. Requires the owner_key; a sub-key cannot mint another sub-key. Returns {subkey_id, key} where key is shown exactly once, the same as owner_key at w

• aanet_list_subkeys

  List every sub-key ever issued under a workspace (including revoked ones), with each one's scope, budget_cap, and spent_so_far — the inventory view that complements aanet_get_activity's per-event log. Owner_key required; raw key values are never included since they're

• aanet_update_subkey

  Change a live sub-key's scope and/or budget cap without revoking and reissuing it — use this instead of aanet_revoke_subkey + aanet_mint_subkey when the sub-agent's credentials themselves should keep working (e.g. widening its file scope mid-task, or raising a budget

• aanet_revoke_subkey

  Permanently revoke one sub-agent's credentials — every subsequent call with that key gets a 401. Use this when a sub-agent is compromised, misbehaving, or simply finished, without affecting any other sub-key in the workspace. Owner_key required. Immediately relea

• aanet_read_file

  Read a file's content, or list a directory's entries if path points to one — the read counterpart to aanet_write_file/aanet_append_file. Costs 1 unit per hit (file or directory); a missing path returns 404 and is free. Returns {path, content, is_dir, entries, etag}; f

• aanet_write_file

  Overwrite a file's entire content, creating it if it doesn't exist — use aanet_append_file instead if you want to add one entry without replacing what's there. Fires a file_write webhook event on success (see aanet_register_webhook). Pass if_match with the file's

• aanet_append_file

  Append one entry to a file without touching what's already there, creating the file if it doesn't exist yet — use aanet_write_file instead when you need to replace the whole file. Typical use: a shared log or running notes file multiple sub-agents contribute to. Fires

• aanet_delete_file

  Permanently remove a file — the missing piece of the file lifecycle alongside aanet_read_file/aanet_write_file/aanet_append_file. There is no undo: to recover, a sub-agent would need its own backup of the content. Fires a file_delete webhook event on success (see

• aanet_acquire_lock

  Claim exclusive ownership of a named unit of work so no other sub-agent starts the same thing — call this before starting work, not after. Returns {lease_expires_at} on success, or a 409 if another sub-agent already holds an unexpired lease on the same name (that

• aanet_renew_lock

  Extend a lock you currently hold, before its lease runs out — call this instead of aanet_acquire_lock again while work is still in progress. Fails with 404 if nobody holds the lock, or 403 if a different sub-key is the current holder (you can't renew someone else'

• aanet_release_lock

  Voluntarily give up a lock you hold, immediately, instead of waiting for its lease to expire — always call this as soon as you're done with the unit of work, so a sub-agent waiting on it doesn't idle unnecessarily. Free (no charge), unlike acquire/renew. Fails with 40

• aanet_get_lock_status

  Check a lock WITHOUT trying to take it, and tell "nobody ever took it" apart from "someone took it and released it" — a free lock and an already-finished task look identical from aanet_acquire_lock alone. Returns status held | expired (lease ran out, not yet reclaimed

• aanet_get_activity

  Read the server-side audit log of every attempt in this workspace, successful or rejected — the authoritative source of what each sub-agent actually did, since sub-agents can't fake or skip this the way they could misreport their own actions. Owner_key required.

• aanet_get_activity_summary

  Spend totals from the audit log instead of reading every entry: for each group, total_cost (units) and calls. Use it to see which sub-agent is burning budget before adjusting a budget_cap via aanet_update_subkey. Owner_key required. An unknown group_by is an error.

• aanet_get_forecast

  Burn rate and runway: the workspace balance, spend per hour over the last 1h / 24h / 7d (each window shortened to the workspace's age if it is younger) with the hours the balance would last at that pace, and the top spending sub-keys of the last 24h. Each window state

• aanet_submit_feedback

  Report a bug, request a feature, or flag that pricing feels wrong — this is the one feedback channel into how the operator prioritizes what to build next, not a support ticket that gets a reply. Any valid, unrevoked key can call this, owner or sub-key. Returns {fe

• aanet_request_refund

  Ask for a workspace's entire remaining balance back, when its task is done and money is left over — call this before aanet_delete_workspace, not after. Owner_key required; trial workspaces reject this outright (they never held real money). This reserves (zeros ou

• aanet_get_refund_status

  Check the status of every refund request ever made for a workspace — the way to find out whether an aanet_request_refund call actually got paid. Owner_key required. Each entry has status ("pending", "paid", or "rejected"), and tx_hash once paid — verify that transacti

• aanet_send_message

  Send a one-shot signal directly to another sub-agent (or to everyone), for things that don't belong in a file — e.g. "chunk 3 done" or "aborting, don't wait on me". Use aanet_write_file / aanet_append_file instead for anything that needs to persist as durable stat

• aanet_get_messages

  Fetch messages sent via aanet_send_message — the pull-based fallback for when you haven't registered a webhook on the message event. A sub-key only sees messages addressed to it plus broadcasts (to_subkey_id was left unset by the sender); the owner_key sees every mess

• aanet_register_webhook

  Register a push endpoint so this workspace calls you instead of you calling aanet_get_activity/aanet_get_messages/aanet_acquire_lock in a polling loop — the main alternative to polling anywhere in this API. Owner_key required; up to 5 active webhooks per workspace.

• aanet_list_webhooks

  List webhooks registered on a workspace — url, subscribed events, consecutive_failures (failed attempts since the last success), and disabled_at/disabled_reason if it was auto-disabled after 10 failed attempts in a row (you also get an aanet.system message when that h

• aanet_delete_webhook

  Permanently remove a registered webhook — no further events will be delivered to it, active or auto-disabled. Owner_key required. There is no way to temporarily pause one; delete and re-register with aanet_register_webhook if you want it back later (you'll get a new

• aanet_estimate_savings

  Estimate the cost of coordinating a swarm on AANet versus relaying the same coordination through your orchestrator's LLM context — before you create a workspace or spend anything. Same formula as the calculator at https://aanet.space/#savings. AANet side assumes

• aanet_get_webhook_deliveries

  Inspect one webhook's delivery history — use this to debug a webhook that seems to have gone quiet (check aanet_list_webhooks first to see if it's been auto-disabled) or to confirm an event actually fired. Owner_key required. Each entry has event_type, status_code (nu

Security scan

• No findings. We scan names, descriptions and tool definitions for hidden instructions and other prompt-injection patterns.

Recent checks