MIDAS CIVIL NX tools (MIDAS IT Europe)

Reliability

Status and outage history · Atom feed · Watch with other listings

How to connect

Add it to any MCP client that supports remote servers.

{
  "mcpServers": {
    "midas-civil-nx-tools-midas-it-europe": {
      "type": "http",
      "url": "https://midasiteurope.com/mcp"
    }
  }
}

101 tools

• auto_structure_groups

  Creates one structure group per section, per material, or per section + material pair, with the Auto Structure Groups plugin's own engine: it reads every element's section and material, names each group from the prefix and the section/material names (cleaned and cut to 40…

• auto_structure_groups_undo

  Reverses an auto_structure_groups run from the ledger: deletes the groups it created and puts every group it added members to back exactly as it was (from the snapshot taken just before the write). Refuses while a construction stage uses one of those groups, because deleting a…

• b2p_survey

  Reads the model the way the Beam to Plate plugin (1.0.6) does and studies every section the chosen beams use, against CIVIL NX's own published properties (/ope/SECTPROP): whether the outline was READ correctly (A/Iyy/Izz vs published) and how far the PLATE model sits from it…

• b2p_convert

  Converts beam elements into a plate (or solid) mesh of their cross-section with the Beam to Plate plugin's own engine (1.0.6): every section CIVIL NX gives geometry for (rolled/fabricated steel, PSC, boxes, composite, tapered groups, VALUE, catalogue), solid concrete sections as…

• b2p_undo

  Undoes a b2p_convert run from the ledger with the plugin's own Undo: removes the virtual beams, the plates/solids, the rigid links and construction-joint links, the converted loads and the nodes it made, gives the stages and boundary groups back, then puts the beams back with…

• bridge_reshape_read

  Reads the open model the way the Bridge Reshaper plugin (1.0.6) does: the deck (straight, in straight pieces kinked at half-joints or piers, or curved; beam girders, girders meshed as plates, or a spine (single-line) model with its pylons, stays and piers read as substructure…

• bridge_reshape

  Changes the geometry of the bridge in the open model in place, with the Bridge Reshaper plugin's own engine (1.0.6): new span lengths (the deck is stretched - each span keeps its element count), a skew for each support, a new horizontal alignment (straight, segments, fitted…

• bridge_reshape_undo

  Undoes a bridge_reshape run from the ledger with the plugin's own Undo: every row the run overwrote is written back and every row it created is removed, so the model returns exactly. Refuses on a different model, or when the model was edited since the apply (force: true undoes…

• bridge_thermal_calc

  Calculates bridge temperature actions with the Bridge Thermal Loads plugin's own engine: shade air and effective bridge temperatures, the uniform ranges ΔT_N,con / ΔT_N,exp (and bearing ranges), the vertical temperature difference (linear Approach 1 or the non-linear code…

• bridge_thermal_read

  Reads the open model the way the Bridge Thermal Loads plugin does: the deck from a structure group, element list or the CIVIL NX selection, grouped into sections (beams by section, plates by thickness), each with the proposed deck type, depths h and D, and its…

• bridge_thermal_apply

  Calculates the temperature actions for the deck and writes them with the Bridge Thermal Loads plugin's writer: EC1T_Uniform_Exp/_Con (type T, element or system temperature), EC1T_Diff_Heat/_Cool (type TPG: beam section temperature bands, or a linear gradient for Approach 1 and…

• bridge_thermal_undo

  Undoes the latest bridge_thermal_apply or bridge_thermal_remove run (or the run named): deletes the EC1T_ cases present now and puts back the EC1T_ cases and loads saved before that run, merged into each element's current loads so other cases are kept. Refused in a different…

• bridge_thermal_remove

  Removes what the Bridge Thermal Loads plugin writes: every load case whose name starts with EC1T_ (also named sets and ones the plugin window wrote) and all temperature loads in them, on any element. Other load cases are not touched. An undo record is kept, so…

• concurrent_forces_setup

  Concurrent Force Reporter, step 1. Reads the open CIVIL NX model the way the plugin does when it connects and lists what a concurrent-forces run can use: every load case and combination (all ten LCOM tables) with how MIDAS addresses it, whether it is envelope-valued, and whether…

• concurrent_forces

  Concurrent Force Reporter, step 2. For a set of items (elements, nodes, links), finds the load state that makes ONE key effect extreme at ONE key item (max, min or absolute max over the selected load cases and combinations, at every output point), then reports every item's…

• concurrent_forces_probe

  Concurrent Force Reporter diagnostics. For each result source the plugin reads (beam, truss, plate, general link, elastic link, node reaction, node displacement), asks this CIVIL NX build with one item of that kind which table token answers, the columns it returns and how they…

• cs454_lane_layout

  Lays out CS 454 notional lanes, remaining areas, footways and strips on a carriageway cross-section with the CS454 - Moving Load Wizard's own layout engine (Table 5.9a, cl 5.10, ALL model 1 single/convoy, ALL model 2, SV/HB routes and SV/HB with ALL), and lists the case groups…

• cs454_moving_loads_read

  Read-only: changes nothing in the model. Call it before cs454_moving_loads to see what the CS454 - Moving Load Wizard would do. Returns: existing (the lanes, vehicles, cases and groups already in the model, each marked if an earlier cs454_moving_loads run created it)…

• cs454_moving_loads

  CS 454 assessment live loading with the CS454 - Moving Load Wizard plugin's own engine: notional lanes laid out on the carriageway (line lanes on a grillage, surface lanes on a plate deck), ALL model 1/2 vehicles up to the chosen level, SV and HB routes or SV/HB with ALL (every…

• cs454_moving_loads_undo

  Removes the lanes, vehicles, cases, envelopes and groups a cs454_moving_loads run wrote, using the plugin's own cleanup (cases and envelopes first, bottom up, at most 100 per call): anything edited since the run, or still used by something else, is kept. Previews unless apply…

• cs454_combinations_read

  Reads the open model the way the CS 454 Load Assessment Combinations plugin does: every static, construction-stage, settlement and moving load case with the Table A.1 action / CS 454 load model and assessment level it proposes, each tab's gate, the defaults, the option lists…

• cs454_combinations_apply

  Generates CS 454 assessment load combinations with the plugin's engine (Table A.1 γfL by combination 1–4 and limit state, adverse/relieving permanent variants, wind sub-case, ALL/SV/HB traffic with associated traffic, exclusive groups collapsed into envelopes, readable names)…

• cs454_combinations_undo

  Undoes the latest cs454_combinations_apply run (or the run named) with the plugin's cleanup: deletes the rows it wrote that still carry its names (referencing rows first), then restores every table it cleared at the original keys. Previews unless apply: true.

• cs455_describe_section

  Start here when the user shares a reinforcement drawing, photo or schedule. Read from it: cover, for each face the layers (number of bars or spacing, and Ø - mm, inches or #US sizes are all accepted), side bars, links (Ø, legs, spacing); then call this tool. It reads one beam…

• cs455_assess

  CS 455 ULS assessment of reinforced concrete beam sections with the plugin's own engine: reads the concurrent force rows (BEAMFORCE / BEAMFORCEVBM for envelopes and moving loads, kN·m; a moving-load case from a model analysed without 'Normal + Concurrent Force' is refused as NOT…

• cs455_export_calc_sheet

  The report. Assesses one element end exactly as cs455_assess and writes the plugin's reference-format calculation sheet (.xlsx: A4 pages, title block, geometry, materials, reinforcement, section properties, sagging/hogging bending, shear and torsion with live formulas and…

• cs_stage_summary

  Reads the construction stage definition of the open CIVIL NX model with the Construction Stage Reporter plugin's engine and returns, per stage: duration and day range, the structure groups activated (with age and element count) and deactivated (with redistribution), boundary…

• cs_stage_results

  Reads construction-stage analysis results the way the Construction Stage Reporter plugin does (POST /post/TABLE in the construction-stage family, every stage in one query at its last step; stages after the analysis stopped carry the stage before and are flagged published:false)…

• cs_stage_report

  Makes the Construction Stage Reporter plugin's own reports of the open model's construction stages and returns download links (never the file inline): the Excel workbook (summary, stage matrices for structure/boundary/load groups, group tables, stage details, composite sections…

• culvert_preview

  Validates a 2D Culvert project with the plugin's own Eurocode core and returns what it would build: nodes, elements, soil springs, basic load cases (traffic unit cases), the EN 1990 Annex A2 combination counts (ULS, SLS characteristic, quasi-permanent) and the nested CIVIL NX…

• culvert_build

  Writes the 2D Culvert model exactly as the plugin's Build: units, user material, sections, frame, soil springs, supports, every basic load case with its loads, and the nested EN 1990 Annex A2 combinations; then reads the loads back and fails if CIVIL NX dropped any. Into the…

• culvert_build_undo

  Deletes every row a culvert_build wrote (combinations, loads, load cases, springs, supports, groups, elements, nodes, sections, material) from the ledger's record, and puts back the model's units. A model replaced by newDocument cannot be brought back. Previews unless apply…

• culvert_analyse_and_check

  On the culvert model built from the same inputs (refused if the open model's counts differ): runs the CIVIL NX analysis (unless analyse: false), reads the basic-case results (forces, reactions, displacements) and runs the plugin's checks — every Annex A2 combination and vehicle…

• culvert_report

  Runs the checks on the analysed culvert model (as culvert_analyse_and_check, without re-analysing unless analyse: true) and writes the plugin's report: format xlsx (default) = the calculation book in the MIDAS report format with result diagrams captured from CIVIL NX, pdf, or…

• midas_docs_search

  Searches the MIDAS help centre (support.midasuser.com), live: the CIVIL NX and GEN NX online help (every dialog: what it does, where it is in the menus, each input), the MIDAS API (MAPI) JSON manual (every db/ table, its URI, methods, JSON schema and examples), FAQ, tutorials…

• midas_docs_read

  Reads one MIDAS help-centre article in full, as Markdown: headings, notes, input tables, and for the MIDAS API manual the URI, methods, JSON schema and JSON examples as code blocks. Also lists the article's images (links). Long articles come in parts: call again with nextOffset…

• dxf_inspect

  Reads a DXF with the Advanced DXF Importer plugin's own parser and clean-up and reports what an import would create: the file (version, encoding, entity counts, what is ignored or unsupported), its units, every layer with its entities and mapping, and the clean model — nodes…

• dxf_import

  Imports a DXF into the open CIVIL NX model with the Advanced DXF Importer plugin's engine: the same parse, layer mapping, clean-up and write as the plugin. Nodes and elements get new ids above the model's (existing rows are never overwritten); each layer's structure group is…

• dxf_import_undo

  Removes what one dxf_import created, with the plugin's own removal rules: it refuses unless the import's master group is in the open model; deletes the import's elements, then its nodes, only where they still match the fingerprint taken before writing (anything edited since is…

• ec_combinations_read

  Reads the open model the way the Eurocode Load Combinations plugin does: every static, moving (characteristic/frequent pairs), construction-stage, settlement and response-spectrum case with the action and subtype the plugin proposes, the detected bridge type, the default scope…

Security scan

Recent checks