Recalls Consumer

{
  "query": "stroller",
  "recalls": [
    {
      "date": "2026-07-23",
      "description": "This recall involves Peony Design personalized handmade baby bibs and stroller bags. The bibs have scalloped edges, a snap closure, and personalized embroidery on the front. The bibs were sold in fabric designs of geese, strawberries, heart tulip, plaid checks, and floral print. The stroller bags were made in coordinating fabrics including heart tulip, plaid check, floral print, and Winnie the Pooh. Each stroller bag has two straps with snaps at the ends for attachment and is personalized with …",
      "hazards": [
        "The snap can detach from the recalled bibs and stroller bags, posing a risk of serious injury or death from a choking hazard to young children."
      ],
      "injuries": [
        "The firm received three reported incidents of a broken snap on a bib and a broken snap on two stroller bags. No injuries have been reported."
      ],
      "manufacturers": [
        "Peony Design Co., of Howell, MI"
      ],
      "products": [
        "Personalized Baby Bibs and Stroller Bags"
      ],
      "recall_number": "26639",
      "remedies": [
        "Consumers should take the recalled baby bibs and stroller bags away from children immediately, stop using them, and contact Peony Design to receive a full refund. Consumers will be asked to discard the recalled baby bibs and stroller bags."
      ],
      "title": "Peony Design Recalls Personalized Baby Bibs and Stroller Bags Due to Risk of Serious Injury or Death from Choking Hazard",
      "units": "About 52",
      "url": "https://www.cpsc.gov/Recalls/2026/Peony-Design-Recalls-Personalized-Baby-Bibs-and-Stroller-Bags-Due-to-Risk-of-Serious-Injury-or-Death-from-Choking-Hazard"
    },
    {
      "date": "2026-06-18",
      "description": "This recall involves BABESIDE-branded doll and stroller toys. The play toy sets consist of a pink with red stroller, a baby doll dressed in pink and 23 accessories, including a pink and white plate with a fork and spoon, orange juice and milk feeding bottles, a toy pacifier with clip, a milk carton, a bib, a diaper bag, a diaper, a tissue bag with tissues, lotion and baby powder bottles, a small plush bear, a pair of shoes, two sets of clothes and a soft carrier.",
      "hazards": [
        "The recalled toys violate the small parts ban because they are intended for children under three and the small pacifier poses a deadly choking hazard to young children. In addition, the eyes on the plush bear can detach, also posing a choking hazard."
      ],
      "injuries": [
        "None reported"
      ],
      "manufacturers": [
        "Huizhou Huitong Crafts Co. Ltd., of China"
      ],
      "products": [
        "BABESIDE Doll and Stroller Toys"
      ],
      "recall_number": "26561",
      "remedies": [
        "Consumers should stop using the recalled toys' plush bear and pacifier immediately, take them away from children and contact HYBDOLLS for free replacement similar toy accessories, including shipping. Consumers will be asked to destroy the toy's plush bear and pacifier by cutting the bear in half and writing in permanent marker \"X\" on the pacifier and send a photo of the destroyed and marked accessories to [email protected]. Consumers should then dispose of the destroyed accessories."
      ],
      "title": "BABESIDE Doll and Stroller Children's Toys Recalled Due to Risk of Serious Injury or Death from Choking Hazard; Violate Small Parts Ban; Sold on Amazon by HYBDOLLS",
      "units": "About 2,200",
      "url": "https://www.cpsc.gov/Recalls/2026/BABESIDE-Doll-and-Stroller-Childrens-Toys-Recalled-Due-to-Risk-of-Serious-Injury-or-Death-from-Choking-Hazard-Violate-Small-Parts-Ban-Sold-on-Amazon-by-HYBDOLLS"
    },
    {
      "date": "2026-06-18",
      "description": "This recall involves the Aer2 Car Seat Adapters for Joolz Aer2 Strollers. The adapters are designed to transfer the car seat from a car to the stroller. The black adapters are sold in a set of two and are made of plastic. They are sold as accessories. Only the car seat adapters are involved in the recall; the stroller is not involved in the recall. A product identifier starting with NL311 can be found on the inside of the adapter.",
      "hazards": [
        "The recalled car seat adapters can fail to properly attach to the stroller, which may allow the car seat to fall, posing a risk of serious injury from a fall hazard."
      ],
      "injuries": [
        "The firm has received one report of the car seat adapters detaching from the strollers. No injuries have been reported."
      ],
      "manufacturers": [],
      "products": [
        "Joolz Aer2 Car Seat Adapters for Joolz Aer 2 Stroller"
      ],
      "recall_number": "26568",
      "remedies": [
        "Consumers should stop using the Joolz Aer2 Car Seat Adapters immediately, detach them from the stroller and go to http://joolzcarseatadapter.expertinquiry.com to register for a full refund. The firm will provide a video on how to remove the Joolz Aer2 Car Seat Adapters from the stroller. Consumers must return the recalled adapter sets using the prepaid shipping label to receive a refund. Full refunds will be reimbursed via an electronic payment method or a virtual prepaid gift card to use anywhere."
      ],
      "title": "Joolz Recalls Aer2 Car Seat Adapters for Strollers Due to Risk of Serious Injury from Fall Hazard",
      "units": "About 3,840 (In addition, about 148 were sold in Canada)",
      "url": "https://www.cpsc.gov/Recalls/2026/Joolz-Recalls-Aer2-Car-Seat-Adapters-for-Strollers-Due-to-Risk-of-Serious-Injury-from-Fall-Hazard"
    },
    {
      "date": "2025-09-25",
      "description": "This recall involves black Cooling Gel Insert Pads for strollers or car seats and contain an inner cooling layer that is activated by a child's weight. The Hoovy logo appears in white on the bottom right corner of the product. The recalled cooling pads are approximately 16.5 inches long by 14.25 inches wide.",
      "hazards": [
        "The cooling gel pads can become hot if left in the sun or a hot car, posing a burn hazard to young children."
      ],
      "injuries": [
        "The firm has received one consumer report where the child experienced second degree burns to his back, requiring medical attention."
      ],
      "manufacturers": [],
      "products": [
        "Hoovy Cooling Gel Insert Pads for Car Seats and Strollers"
      ],
      "recall_number": "25476",
      "remedies": [
        "Consumers should immediately stop using the recalled Cooling Gel Insert Pad and contact AMTRADING for instructions on receiving a full refund. Consumers can go to https://hoovyproducts.com/pages/product-recall for instructions on how to register for the recall and to dispose of the recalled pad."
      ],
      "title": "AMTRADING Recalls Hoovy Cooling Gel Insert Pads for Car Seats and Strollers Due to Burn Hazard",
      "units": "About 20,000",
      "url": "https://www.cpsc.gov/Recalls/2025/AMTRADING-Recalls-Hoovy-Cooling-Gel-Insert-Pads-for-Car-Seats-and-Strollers-Due-to-Burn-Hazard"
    },
    {
      "date": "2025-04-10",
      "description": "This recall involves the Brunch & Go Stroller Toy. The model number (HGB85) is located on the tag attached to the toast. The toy features a pretend avocado toast and three attachments: a mirror tomato, a crinkle bacon and an egg teether.",
      "hazards": [
        "The yolk of the toy egg can crack and create small parts, posing a choking hazard to young children."
      ],
      "injuries": [
        "Fisher-Price has received five reports of the yolk of the toy egg cracking and breaking. In two reports, an infant had a small piece in their mouth. No injuries have been reported."
      ],
      "manufacturers": [],
      "products": [
        "Brunch & Go Stroller Toys"
      ],
      "recall_number": "25215",
      "remedies": [
        "Consumers should immediately stop using the recalled stroller toys, keep them away from children, and contact Fisher-Price to receive a free replacement stroller toy. Consumers will be asked to permanently mark the egg component of the stroller toy with the word \"Recall\" and the unique identifier, and upload a photo of the marked toy at https://service.mattel.com/us/recall.aspx. Upon receipt of the replacement confirmation email, consumers should dispose of the recalled product in the trash. For specific instructions on how to mark the stroller toy and upload the photo, consumers should go to https://service.mattel.com/us/recall.aspx. Fisher-Price is contacting all known purchasers directly."
      ],
      "title": "Fisher-Price Recalls Brunch & Go Stroller Toys Due to Choking Hazard",
      "units": "About 253,000 (In addition, about 4,500 were sold in Canada)",
      "url": "https://www.cpsc.gov/Recalls/2025/Fisher-Price-Recalls-Brunch-Go-Stroller-Toys-Due-to-Choking-Hazard"
    }
  ],
  "source": "US Consumer Product Safety Commission recall API (public domain)",
  "total_matches": 111
}

# bash or zsh: see the payment challenge. Nothing is charged.
curl -sS -g -i 'https://saylorinnovations.com/api/recalls/consumer?limit=5&q=stroller'

# x402 v2 sends the challenge base64-encoded in the PAYMENT-REQUIRED header (v1 sends it in the body).
# To read the header:
curl -sS -g -o /dev/null -D - 'https://saylorinnovations.com/api/recalls/consumer?limit=5&q=stroller' \
  | grep -i '^payment-required:' | cut -d' ' -f2 | tr -d '\r' | base64 --decode

// npm i @x402/fetch @x402/evm viem
import { wrapFetchWithPayment, x402Client } from "@x402/fetch";
import { registerExactEvmScheme } from "@x402/evm/exact/client";
import { privateKeyToAccount } from "viem/accounts";

// Pays at most $0.01 per call.
const client = new x402Client().setSpendControls({ maxAmountPerPayment: "$0.01" });
registerExactEvmScheme(client, { signer: privateKeyToAccount(process.env.EVM_PRIVATE_KEY) });
const pay = wrapFetchWithPayment(fetch, client);

// Not sure it's safe to pay? ToolVet checks it first for $0.005. Pay for that from a separate
// client: this one is capped at $0.01 per payment. GET https://toolvet.app/api/v1/check?url=https%3A%2F%2Fsaylorinnovations.com%2Fapi%2Frecalls%2Fconsumer
const res = await pay("https://saylorinnovations.com/api/recalls/consumer?limit=5&q=stroller");
console.log(res.status, await res.text());

# pip install "x402[requests,evm]"
import os
from eth_account import Account
from x402 import x402ClientSync
from x402.http.clients import x402_requests
from x402.mechanisms.evm import EthAccountSigner
from x402.mechanisms.evm.exact.register import register_exact_evm_client

# Pays at most $0.01 per call.
client = x402ClientSync().set_spend_controls({"max_amount_per_payment": "$0.01"})
register_exact_evm_client(client, EthAccountSigner(Account.from_key(os.environ["EVM_PRIVATE_KEY"])))

with x402_requests(client) as session:
    res = session.get("https://saylorinnovations.com/api/recalls/consumer?limit=5&q=stroller")
    print(res.status_code, res.text)