TuneWorks

Reliability

Status and outage history · Atom feed · Watch with other listings

How to connect

Add it to any MCP client that supports remote servers.

{
  "mcpServers": {
    "tuneworks": {
      "type": "http",
      "url": "https://tuneworks.ai/mcp"
    }
  }
}

100 tools

• calculate_race_fuel_and_weight

  Plan a race fuel load, reserve, start weight, and projected minimum-weight margin. Calculates from measured inputs without authentication and does not read or save account data. Assumes the entered per-lap consumption applies to race, formation, and allowance laps. Finish weight…

• calculate_gear_ratio_speed

  Check speed, RPM, and shift drop from tire size, final drive, and gear ratio. Calculates from measured inputs without authentication and does not read or save account data. Use measured tire diameter when possible. Tire growth and converter/clutch slip can move real-world…

• calculate_tire_pressure_adjustment

  Turn cold, hot, and target hot pressures into the next cold pressure to try. Calculates from measured inputs without authentication and does not read or save account data. This gives a next-test pressure, not a universal ideal. Recheck after the next run.

• calculate_corner_balance

  Calculate cross weight, left/right balance, and front/rear split from four scale pads. Calculates from measured inputs without authentication and does not read or save account data. Measure the car in the same state you drive it: driver, fuel, ballast, and tire pressures matter.

• calculate_spring_wheel_rate

  Convert spring rate and motion ratio into wheel rate for setup comparisons. Calculates from measured inputs without authentication and does not read or save account data. Wheel rate compares spring changes. It does not account for bars, bump stops, tires, or aero load.

• calculate_fuel_injector_size

  Estimate injector size from horsepower, fuel type, injector count, and duty cycle. Calculates from measured inputs without authentication and does not read or save account data. This is a sizing estimate. Confirm with your tuner and fuel pressure data.

• convert_afr_lambda

  Convert AFR and lambda across gasoline, E85, methanol, and race fuel scales. Calculates from measured inputs without authentication and does not read or save account data. Use this as a conversion reference. Tune targets depend on fuel, engine, load, and calibration strategy.

• calculate_brake_bias

  Estimate front brake bias from piston area, rotor size, and pad friction. Calculates from measured inputs without authentication and does not read or save account data. This estimates mechanical bias. Tire grip, weight transfer, ABS, and balance bars still matter.

• compare_tire_sizes

  Compare tire diameter, circumference, ride height, and speedometer change. Calculates from measured inputs without authentication and does not read or save account data. Actual mounted diameter changes by tire model and pressure. Use manufacturer specs when available.

• check_race_alignment

  Check camber and total toe against broad autocross and track baseline ranges. Calculates from measured inputs without authentication and does not read or save account data. This is a baseline checker, not a vehicle-specific prescription. Tire wear and driver feedback decide the…

• calculate_lap_time_delta

  Compare two laps or sector sets and see the best theoretical lap. Calculates from measured inputs without authentication and does not read or save account data. Use sectors from timing, video, or data logs. Compare similar conditions before blaming setup.

• calculate_ethanol_blend

  Calculates an ethanol blend for a fresh tank, existing fuel, correction, or ratio without authentication or account-data access. Percentages are 0–100 and all volumes use the selected unit. Source ethanol contents are measured values. Fresh mode requires finalVolume; existing…

• diagnose_handling_issue

  Provides understeer/oversteer setup guidance without authentication or access to TuneWorks account data.

• analyze_tire_temperatures

  Interprets inside, middle, and outside tire temperature readings without authentication or access to TuneWorks account data.

• recommend_autocross_damper_adjustment

  Provides a bounded shock/damper adjustment recommendation without authentication or access to TuneWorks account data.

• find_autocross_sites

  Search the public TuneWorks Autocross Site Finder by coordinates and minimum paved-area dimensions. This may take several minutes because it queries live map and imagery providers.

• get_tuneworks_app_capabilities

  Describes TuneWorks free public capabilities and connected garage capabilities for vehicles, setups, sessions, maintenance, shop lists, Share Build, and log history.

• create_vehicle

  Adds a vehicle to the connected user’s TuneWorks garage so setup, session, modification, maintenance, and optimization context can be attached. Deletes are not supported.

• update_vehicle

  Edits an existing vehicle in the connected user’s TuneWorks garage. Deletes are not supported.

• list_vehicle_modifications

  List bounded structured modifications for an accessible TuneWorks vehicle.

• get_vehicle_modification

  Read one structured modification from an accessible TuneWorks vehicle.

• create_vehicle_modification

  Create a structured modification on an editable TuneWorks vehicle.

• update_vehicle_modification

  Update a structured modification on an editable TuneWorks vehicle.

• archive_vehicle_modification

  Mark a modification canceled so it remains in vehicle history. Requires explicit confirmation.

• delete_vehicle_modification

  Permanently delete a vehicle modification and its files. Requires explicit confirmation.

• get_garage_summary

  Returns the connected garage, its activation stage, missing baseline data, and the next available actions toward vehicle optimization.

• list_vehicles

  Lists vehicles saved in the connected user’s TuneWorks app garage and reports the next activation action when the garage is empty.

• get_vehicle_context

  Returns one saved TuneWorks vehicle with modifications, setups, sessions, maintenance, lists, log metadata, optimization readiness, and next actions.

• list_logs

  List bounded metadata for logs attached to one connected TuneWorks vehicle. Raw log samples are not returned.

• get_log_context

  Read bounded metadata, channel schema summary, and saved focus window for one accessible TuneWorks log. Raw log samples are not returned.

• list_ai_log_tuner_transcripts

  List recent AI Log Tuner conversations owned by the connected TuneWorks user. Returns conversation metadata without message contents.

• get_ai_log_tuner_transcript

  Read the ordered messages and saved analysis summaries for one AI Log Tuner conversation owned by the connected TuneWorks user.

• list_ai_race_engineer_transcripts

  List recent AI Race Engineer conversations owned by the connected TuneWorks user. May be filtered to one vehicle.

• get_ai_race_engineer_transcript

  Read one AI Race Engineer conversation and its ordered messages. Internal execution debug traces are not returned.

• archive_vehicle

  Archive a connected user vehicle using TuneWorks soft-delete behavior. Requires explicit user confirmation and never hard-deletes data.

• list_setups

  Lists chassis setups and setup history saved in the connected TuneWorks account.

• create_setup

  Saves a new TuneWorks setup for a vehicle. Deletes are not supported.

• update_setup

  Edits an existing TuneWorks setup revision. Deletes are not supported.

• archive_setup

  Archive all active revisions of a connected user setup. Requires explicit user confirmation and never hard-deletes data.

• list_sessions

  Lists driving sessions, events, track days, autocross runs, and session notes saved in TuneWorks.

Security scan

Recent checks